View IT9130_7785585.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this specification is subject to change without not ice. it is provided as is and for reference only. for purchasing information, please contact the nearest ite tech sales representatives. IT9130 series dvb-t front-end integrated receiver product brief v0.0.4 ite tech. inc.
www.ite.com.tw IT9130 v0.0.4 copyright ? 2009 ite tech. inc. this is a preliminary document release. all specifi cations are subject to change without notice. the material contained in this document supersedes all previous material issued for the products herei n referenced. please contact ite tech. inc. for the l atest document(s). all sales are subject to ites standard terms and c onditions, a copy of which is included in the back of this document. ite, IT9130 is a trademark of ite tech. inc. all other trademarks are claimed by their respectiv e owners. all specifications are subject to change without no tice. additional copies of this manual or other ite liter ature may be obtained from: ite tech. inc. tel: 886-2-29126889 marketing department fax: 886-2-2910-2551, 886-2-2 910-2552 7f, no.233-1, baociao rd., sindian city, taipei county 23145, taiwan, roc if you have any marketing or sales questions, pleas e contact: p.y. chang, at ite taiwan: e-mail: p.y.chang@ite.com.tw, tel: 886-2-29126889 x 6052, fax: 886-2-29102551 you may also find the local sales representative ne arest you on the ite web site. to find out more about ite, visit our world wide we b at: http://www.ite.com.tw or e-mail itesupport@ite.com.tw for more product in formation/services
www.ite.com.tw IT9130 v0.0.4 i abstract IT9130 is a series of highly integrated dvb-t single-chip receiver consisting of high quality rf tuner front-end and cofdm demudulator to aim for superior performance , ultra-low power consumption, and simple system design of various dvb-t applications. IT9130 offers very low total bill of material solutions. it does not require external saw filter, lna, or balun. IT9130 requires only on e power regulator and one crystal to further simplify the system design and reduce the system cost. the ultra-low power consumption feature of the IT9130 makes it the perfect choice for all kinds of dvb-t applications. compliant specifications: etsi en 300 744 v1.5.1 dvb-t standard, including annexes f and g. nordig unified requirements v2.1 iec 62002-2: edition-2 05-2008 (mbrai 2.0) iso/iec 62216-1: 2009 (e), e-book dtg d-book 6, uk digital terrestrial television bsmi, taiwan supported rf frequencies: vhf band iii (170mhz ~ 240mhz) uhf band (470mhz ~ 862mhz) supported host interfaces: usb2.0 mpeg2 ts with 2-wire control bus package information qfn-48 7mm x 7mm C it9133, it9135 qfn-56 8mm x 8mm C it9137 applications usb stick, mini card, half-mini card, and express card to enable tv functions for desktops and notebooks dvb-t set-top boxes integrated digital dvb-t televisions cellular phone and pda with mobile tv built-in personal navigation device (pnd) with tv built-in portable digital tvs or media players (pmp) with tv functions mobile dvb-t receivers with dual antennas (diversity receptions) digital photo frame with digital tv built-in IT9130 dvb-t receiver usb pnd pmp desktop laptop portable tv portable dvd mpeg ts stb, pvr mobile tv in cars with dual antennas cellular phone pda
www.ite.com.tw IT9130 v0.0.4 ii IT9130 this page is intentionally left blank.
www.ite.com.tw IT9130 v0.0.4 specifications subject to change without notice 01/21/2010 1 features 1. features integrated rf tuner for dvb-t - built-in rf tuner to support dvb-t receptions at uhf band and vhf band. - zero-if direct conversion architecture to achieve low power consumption. - single-ended rf input eliminates the requirement of balun. - no external saw filter is required. - integrated lna with low noise figure to meet mbrai 2.0 requirement and achieve superior sensitivity performance without the need of external lna. - integrated received signal strength indicator ( rssi ) for precise agc adjustment in the environments with adjacent channel interferences (aci). - automatic rf/bb agc gain distribution to properly compromise the performance between noise and linearity. superior dvb-t cofdm reception - complete ofdm demodulation compliant to dvb-t specification etsi 300 744, including annexes f and g. - performance compliant to nordig unified v2.0, d-book, e-book, taiwan bsmi, and mbrai2.0. - robust immunity to doppler effect in mobile / portable reception. - superior dynamic echo performance which meets nordig and mbrai echo inside and outside guard interval tests. - diversity-enabled dual channel receiving capability enabling high mobility dvb-t reception, picture-in-picture (pip), and record while watching (pvr) applications. - automatic 2k/4k/8k mode and guard interval detection. - digital carrier frequency offset correction up to 500khz. - digital crystal frequency jitter compensation up to 100ppm. - all-digital time and frequency synchronization tracking loop. - all-digital adjacent channel interference (aci) rejection filtering for supporting 5/6/7/8mhz bandwidth. - adaptive co-channel interference (cci) filtering for interferences including pal/ secam/nicam. - effective impulse noise rejection - fast channel scan and switch time. versatile interfaces - embedded usb 1.1 and 2.0 compatible interface support with suspend mode. - serial and parallel mpeg2-ts output interface with simple two-wire control bus. - infrared ( ir ) interface provided for remote control. - multiple sets of pwm and gpio for external control purpose. compact for application designs - single crystal (12mhz or 20.48 mhz) is only required to provide all internal clocks. - on-chip ldo provides the flexibility of system- wise power design. - single power supply (3.3v) is only required, with the option of using external 1.2v. - superior all-cmos soc technology enables ultra - low power consumption (minimum 200mw core power consumption operating at 8mhz, 8k mode, 64qam, and code rate 7/8 with transport stream output) - single-ended rf input eliminates the requirement of balun. - high sensitivity and aci immunity are achieved without external lna . simple application programming interface with complete sw package - complete api for fast and easy integration with application processors , multimedia processors , or cpu-based platforms.
www.ite.com.tw IT9130 v0.0.4 2 it91 3 0 - integrated transport stream de-multiplexer ( pid filtering ) with bypass mode. - comprehensive performance and signal condition monitoring parameters available through register access. - auto signal re-acquisition without external programming - windows mobile/ce drivers support. - usb bda driver support for windows 7 /xp/vista. - linux driver support.
www.ite.com.tw IT9130 v0.0.4 3 pin configuration 2. pin configuration it9133fn vdd_adc gnd gnd vdd_lna inp_vhf inn_uhf vdd_lna rext gnd gnd vdd33_lo vdd_clk host_b8 host_b7 host_b6 host_b5 host_b4 vddio2 host_b3 vdd1 vddio2 host_b2 host_b1 host_b0 12 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 36 35 34 33 32 31 30 29 28 27 26 25 37 38 39 40 41 42 43 44 45 46 47 48 host_b9 host_b10 host_b11 gpioh5 vddio2 gpioh6 gpioh7 vdd1 vddah_reg reg_out atestn atestp gpioh4 ioscl iosda vddio2 vdd1 gpioh3 gpioh2 gpioh1 testmode resetn vdd_xo xtal
www.ite.com.tw IT9130 v0.0.4 4 it91 3 0 it9135fn vdd_adc vdd_lpf vdd_mxr vdd_lna inp_vhf inn_uhf vdd_lna vdd_bias rext vdd33_lo vdd_lo vdd_clk nc nc vddio nc dm dp avddhp vdd1 vddio nc nc gpioh4 12 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 36 35 34 33 32 31 30 29 28 27 26 25 37 38 39 40 41 42 43 44 45 46 47 48 nc gpioh5 vddio gpioh6 gpioh7 gpioh8 vdd1 nc vddah_reg reg_out atestn atestp ioscl iosda vddio vdd1_out vdd1 gpioh3 gpioh2 gpioh1 testmode resetn vdd_xo xtal
www.ite.com.tw IT9130 v0.0.4 5 pin configuration it9137fn atestp vdd_adc vdd_lpf vdd_mxr vdd_lna inp_vhf nc inn_uhf vdd_lna vdd_bias rext vdd33_lo vdd_lo vdd_clk host_b7 host_b6 host_b5 host_b4 vddio host_b3 dm dp avddhp vdd1 vddio host_b2 host_b1 host_b0 12 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 42 41 40 39 38 37 36 35 34 33 32 31 30 29 43 44 45 46 47 48 49 50 51 52 53 54 55 56 gpioh4 ioscl iosda vddio vdd1_out vdd1 gpioh3 gpioh2 gpioh1 testmode resetn nc vdd_xo xtal host_b8 host_b9 host_b10 host_b11 gpioh5 vddio gpioh6 gpioh7 gpioh8 vdd1 vddah_reg reg_out cko atestn
www.ite.com.tw IT9130 v0.0.4 6 it91 3 0 this page is intentionally left blank.
www.ite.com.tw IT9130 v0.0.4 7 pin description 3. pin description table 3-1. pin description of it9133 pin(s) no. symbol attribute description 1 vdd_adc p rf analog power supply 2 gnd to be grounded 3 gnd to be grounded 4 vdd_lna p rf analog power supply 5 inp_vhf aio rf signal input for vhf 6 inn_uhf aio rf signal input for uhf 7 vdd_lna p rf analog power supply 8 rext br external bias resistor 9 gnd to be grounded 10 gnd to be grounded 11 vdd33_lo p rf analog power supply 12 vdd_clk p rf analog power supply 13 xtal aio crystal input 14 vdd_xo p rf analog power supply 15 resetn dio power-on reset (low active) 16 testmode dio test mode selection; tied to ground for normal operation. 17 gpioh1 dio general purpose i/o 18 gpioh2 dio general purpose i/o 19 gpioh3 dio general purpose i/o 20 vdd1_out p regulator output power for core usage 21 vddio p digital i/o power 22 iosda dio two-wire bus serial data line 23 ioscl dio two-wire bus clock line 24 gpioh4 dio general purpose i/o 25 host_b0 dio host interface 26 host_b1 dio host interface 27 host_b2 dio host interface 28 vddio p digital i/o power 29 vdd1 p core power 30 host_b3 dio host interface 31 vddio p digital i/o power 32 host_b4 dio host interface 33 host_b5 dio host interface 34 host_b6 dio host interface 35 host_b7 dio host interface 36 host_b8 dio host interface 37 host_b9 dio host interface 38 host_b10 dio host interface 39 host_b11 dio host interface 40 gpioh5 dio general purpose i/o 41 vddio p digital i/o power 42 gpioh6 dio general purpose i/o 43 gpioh7 dio general purpose i/o; ir 44 vdd1 p core power 45 vddah_reg p rf analog power supply 46 reg_out p regulator output for rf usage 47 atestn aio negative i/o for internal testing (not connected) 48 atestp aio positive i/o for internal testing (not connected)
www.ite.com.tw IT9130 v0.0.4 8 it91 3 0 note: p: power, aio: analog input/output, dio: digi tal input/output, br: bias resistor table 3-2. pin description of it9135 pin(s) no. symbol attribute description 1 vdd_adc p rf analog power supply 2 vdd_lpf p rf analog power supply 3 vdd_mxr p rf analog power supply 4 vdd_lna p rf analog power supply 5 inp_vhf aio rf signal input for vhf 6 inn_uhf aio rf signal input for uhf 7 vdd_lna p rf analog power supply 8 vdd_bias p rf analog power supply 9 rext br external bias resistor 10 vdd33_lo p rf analog power supply 11 vdd_lo p rf analog power supply 12 vdd_clk p rf analog power supply 13 xtal aio crystal input 14 vdd_xo p rf analog power supply 15 resetn dio power-on reset (low active) 16 testmode dio test mode selection; tied to ground for normal operation. 17 gpioh1 dio general purpose i/o 18 gpioh2 dio general purpose i/o 19 gpioh3 dio general purpose i/o 20 vdd1 p core power 21 vdd1_out p regulator output power for core usage 22 vddio p digital i/o power 23 iosda dio two-wire bus serial data line 24 ioscl dio two-wire bus clock line 25 gpioh4 dio general purpose i/o 26 nc not connected 27 nc not connected 28 vddio p digital i/o power 29 vdd1 p core power 30 avddhp p power for usb 31 dp aio differential positive signal for usb 32 dm aio differential negative signal for usb 33 nc not connected 34 vddio p digital i/o power 35 nc not connected 36 nc not connected 37 nc not connected 38 gpioh5 dio general purpose i/o 39 vddio p digital i/o power 40 gpioh6 dio general purpose i/o 41 gpioh7 dio general purpose i/o; ir 42 gpioh8 dio general purpose i/o 43 vdd1 p core power 44 nc not connected
www.ite.com.tw IT9130 v0.0.4 9 pin description pin(s) no. symbol attribute description 45 vddah_reg p rf analog power supply 46 reg_out p regulator output for rf usage 47 atestn aio negative i/o for internal testing (not connected) 48 atestp aio positive i/o for internal testing (not connected) note: p: power, aio: analog input/output, dio: digi tal input/output, br: bias resistor table 3-3. pin description of it9137 pin(s) no. symbol attribute description 1 atestp aio positive i/o for internal testing (not connected) 2 vdd _ adc p rf analog power supply 3 vdd_ lpf p rf analog power supply 4 vdd_ mxr p rf analog power supply 5 vdd_ lna p rf analog power supply 6 inp_vhf aio rf signal input for vhf 7 nc not connected. 8 inn_uhf aio rf signal input for uhf 9 vdd_ lna p rf analog power supply 10 vdd_ bias p rf analog power supply 11 rext br external bias resistor 12 vdd33_ lo p rf analog power supply 13 vdd_lo p rf analog power supply 14 vdd_clk p rf analog power supply 15 xtal aio crystal input 16 vdd_xo p rf analog power supply 17 nc not connected 18 resetn dio power-on reset (low active) 19 testmode dio test mode selection; tied to ground for normal operation. 20 gpioh1 dio general purpose i/o 21 gpioh2 dio general purpose i/o 22 gpioh3 dio general purpose i/o 23 vdd1 p core power 24 vdd1_out p regular output power for core usage 25 vddio p digital i/o power 26 iosda dio two-wire bus serial data line 27 ioscl dio two-wire bus clock line 28 gpioh4 dio general purpose i/o 29 host_b0 dio host interface 30 host_b1 dio host interface 31 host_b2 dio host interface 32 vddio p digital i/o power 33 vdd1 p core power 34 avddhp p power for usb 35 dp aio differential positive signal for usb 36 dm aio differential negative signal for usb 37 host_b3 dio host interface 38 vddio p digital i/o power 39 host_b4 dio host interface
www.ite.com.tw IT9130 v0.0.4 10 it91 3 0 pin(s) no. symbol attribute description 40 host_b5 dio host interface 41 host_b6 dio host interface 42 host_b7 dio host interface 43 host_b8 dio host interface 44 host_b9 dio host interface 45 host_b10 dio host interface 46 host_b11 dio host interface 47 gpioh5 dio general purpose i/o 48 vddio p digital i/o power 49 gpioh6 dio general purpose i/o 50 gpioh7 dio general purpose i/o; ir 51 gpioh8 dio general purpose i/o 52 vdd1 p core power 53 vddah_reg p rf analog power supply 54 reg_out p regulator output power for rf usage 55 cko aio clock output for another device 56 atestn aio negative i/o for internal testing (not connected) note: p: power, aio: analog input/output, dio: digi tal input/output, br: bias resistor table 3-4. strapping pins for mode and clock select ions pin name selection {gpioh2,gpioh1} crystal frequency: 00 crystal = 12 mhz 01 crystal = 20.48mhz {gpioh8,gpioh7,gpioh6,gpioh5} mode strapping and 2-wire bus address selection: 00xx ts mode, {gpioh6, gpioh5} = 2-wire address[1:0 ] 0001 salve device of dca mode 0101 usb mode note: strapping sampled at the rising edge of the reset s ignal table 3-5. host interface pin descriptions mode pin ts output mode ts input mode diversity master mode diversity slave mode host_b0 mpeg fail mpeg data[7] output data[3] output clock host_b1 mpeg sync mpeg data[6] output data[2] output valid host_b2 mpeg valid mpeg data[5] output data[1] output data[0] host_b3 mpeg clock mpeg data[4] output data[0] output data[1]
www.ite.com.tw IT9130 v0.0.4 11 pin description host_b4 mpeg data[0] mpeg data[3] output valid output data[2] host_ b5 mpeg data[1] mpeg data[2] output clock output data[3] host_b6 mpeg data[2] mpeg data[1] input data[3] input clock host_b7 mpeg data[3] mpeg data[0] input data[2] input valid host_b8 mpeg data[4] mpeg clock input data[1] input data[0] host_b9 mpeg data[5] mpeg valid input data[0] input data[1] host_b10 mpeg data[6] mpeg sync input valid input data[2] host_b11 mpeg data[7] mpeg fail input clock input data[3]
www.ite.com.tw IT9130 v0.0.4 12 it91 3 0 this page is intentionally left blank.
www.ite.com.tw IT9130 v0.0.4 13 package information 4. package information it9133fn/ it9135fn C qfn48
www.ite.com.tw IT9130 v0.0.4 14 it91 3 0 it9137fn C qfn56
www.ite.com.tw IT9130 v0.0.4 15 ordering information 5. ordering information part number description package body size it9133fn/ax dvb-t front-end receiver with mpeg ts interface for uhf/vhf dvb-t receptions. qfn 48 7mm 7mm it9135fn/ax dvb-t front-end receiver with usb2.0 interface for uhf/vhf dvb-t receptions. qfn 48 7mm 7mm it9137fn/ax dvb-t front-end receiver with usb2.0, diversity receiving, and mpeg ts interfaces for uhf/vhf dvb-t receptions. qfn 56 8mm 8mm
www.ite.com.tw IT9130 v0.0.4 16 it91 3 0 this page is intentionally left blank.
www.ite.com.tw IT9130 v0.0.4 17 top marking information it9037fn 0917-xxx xxxxxx date code (the 17th week of the year 2009) lot id 6. top marking information part no. tracking code
ite tech. inc. terms and conditions of sale (rev: 2005) 0. parties ite tech. inc. (seller) is a company headquartered in taiw an, republic of china, and incorporated under laws of republic of china, buy er is a company or an entity, purchasing product from ite tech. inc.. 1. acceptance of terms buyer accepts these terms (i) by written acceptance (by purchase order or otherwise), or (ii) by failure to return go ods described on the face of the packing list within five days of their delivery. 2. delivery (a) delivery will be made free carrier (incoterms), seller' s warehouse, science- based industrial park, hsinchu, taiwan. (b) title to the goods and the entire risk will pass to buyer up on delivery to carrier. (c) shipments are subject to availability. seller shall mak e every reasonable effort to meet the date(s) quoted or acknowledged; and if seller mak es such effort, seller will not be liable for any delays. 3. terms of payment (a) terms are as stated on seller's quotation, or if none are s tated, net thirty (30) days. accounts past due will incur a monthly charge at the rat e of one percent (1%) per month (or, if less, the maximum allowed by applicable law ) to cover servicing costs. (b) seller reserves the right to change credit terms at any ti me in its sole discretion. 4. limited warranty (a) seller warrants that the goods sold will be free from defe cts in material and workmanship and comply with seller's applicable published specifications for a period of ninety (90) days from the date of seller's delivery. withi n the warranty period and by obtaining a return number from seller, buyer may request r eplacement or repair for defective goods. (b) goods or parts which have been subject to abuse (includin g without limitation repeated or extended exposure to conditions at or near the li mits of applicable absolute ratings) misuse, accident, alteration, neglect, or unauthorized repair or improper application are not covered by any warranty. no war ranty is made with respect to custom products or goods produced to buyer's spec ifications (unless specifically stated in a writing signed by seller). (c) no warranty is made with respect to goods used in devices i ntended for use in applications where failure to perform when properly used ca n reasonably be expected to result in significant injury (including, without limita tion, navigation, aviation or nuclear equipment, or for surgical implant or to support or s ustain life) and buyer agrees to indemnify, defend, and hold harmless seller from a ll claims, damages and liabilities arising out of any such uses. (d) this paragraph 4 is the only warranty by seller with respe ct to goods and may not be modified or amended except in writing signed by an auth orized officer of seller. (e) buyer acknowledges and agrees that it is not relying on an y applications, diagrams or circuits contained in any literature, and buyer will test all parts and applications under extended field and laboratory conditio ns. notwithstanding any cross-reference or any statements of compatibility, funct ionality, interchangeability, and the like, the goods may differ from similar goods from oth er vendors in performance, function or operation, and in areas not contai ned in the written specifications, or as to ranges and conditions outside such specifications; and buyer agrees that there are no warranties and that seller is not res ponsible for such things. (f) except as provided above, seller makes no warranties or conditions, express, implied, or statutory; and seller exp ressly excludes and disclaims any warranty or condition of merchantability or fitness for particular purpose or application. 5. limitation of liability (a) seller will not be liable for any loss, damage or penalty r esulting from causes beyond its reasonable control, including but not limited to delay by others, force majeure, acts of god, or labor conditions. in any such event, the date(s) for seller's performance will be deemed extended for a period equal to any delay resulting. (b) the liability of seller arising out of the contract or any goods sold will be limited to refund of the purchase price or replacement of purchased goods (returned to seller freight pre-paid) or, with seller's prior written consent, repair o f purchased goods. (c) buyer will not return any goods without first obtaining a customer return order number. (d) as a separate limitation, in no event will seller be liabl e for costs of substitute goods; for any special, consequenti al, incidental or indirect damages; or loss of use, opportunity , market potential, and/or profit on any theory (contract, to rt, from third party claims or otherwise). these limitations sh all apply notwithstanding any failure of essential purpose of a ny remedy. (e) no action against seller, whether for breach, indemnifi cation, contribution or otherwise, shall be commenced more than one year after the ca use of action has accrued, or more than one year after either the buyer, user or other person knew or with reasonable diligence should have known of the matter or of any claim of dissatisfaction or defect involved; and no such claim may be brought unless seller has first been given commercially reasonable notice, a full written explanation of all pertinent details, and a good faith opportunity to resolve t he matter. (f) buyer expressly agrees to the limitations of this paragraph 5 and to their reasonableness. 6 . s u b s t i t u t i o n s a n d m o d i f i c a t i o n s seller may at any time make substitutions for product ordere d which do not materially and adversely affect overall performance with t he then current specifications in the typical and intended use. seller rese rves the right to halt deliveries and shipments and alter specifications and pric es without notice. buyer shall verify that the literature and information is current before purchasing. 7. cancellation the purchase contract may not be canceled by buyer except wit h written consent by seller and buyer's payment of reasonable cancell ation charges (including but not be limited to expenses already incurred for labor and material, overhead, commitments made by seller, and a reasonable profit). 8. indemnification seller will, at its own expense, assist buyer with technical support and information in connection with any claim that any parts as sh ipped by seller under the purchase order infringe any valid and enforceable copyrigh t, or trademark, provided however, that buyer (i) gives immediate written notice to se ller, (ii) permits seller to participate and to defend if seller requests to do so, and (ii i) gives seller all needed information, assistance and authority. however, seller wi ll not be responsible for infringements resulting from anything not entirely manufa ctured by seller, or from any combination with products, equipment, or materials not fur nished by seller. seller will have no liability with respect to intellectual property mat ters arising out of products made to buyer's specifications, code, or designs. except as expressly stated in this paragraph 8 or in another w riting signed by an authorized officer, seller makes no representations and/o r warranties with respect to intellectual and/or industrial property and/or with respe ct to claims of infringement. except as to claims seller agrees in writing to defend, buyer will indemnify, defend and hold harmless seller from all claims, costs, loss es , and damages (including attorneys fees) against and/or aris ing out of goods sold and/or shipped hereunder. 9. no confidential information seller shall have no obligation to hold any information in co nfidence except as provided in a separate non-disclosure agreement signed by b oth parties. 10. entire agreement (a) these terms and conditions are the entire agreement and t he only representations and understandings between seller and buy er, and no addition, deletion or modification shall be binding on seller unless e xpressly agreed to in written and signed by an officer of seller. (b) buyer is not relying upon any warranty or representation except for those specifically stated here. 11. applicable law the contract and all performance and disputes arising out of or relating to goods involved will be governed by the laws of r.o.c. (taiwan, repu blic of china), without reference to the u.n. convention on contracts for the intern ational sale of goods or to conflict of laws principles. buyer agrees at its sole expens e to comply with all applicable laws in connection with the purchase, use or sale of the goods prov ided hereunder and to indemnify seller from any failure by buyer to so comply. with out limiting the foregoing, buyer certifies that no technical data or direct products thereof will be made available or re-exported, directly or indirectly, to any country to which such export o r access is prohibited or restricted under r.o.c. laws or u.s. laws or regulations, unless prior a uthorization is obtained from the appropriate officials and agencies of the government as req uired under r.o.c. or u.s. laws or regulations. 12. jurisdiction and venue the courts located in hsinchu, taiwan, republic of china, wi ll have the sole and exclusive jurisdiction and venue over any dispute arising o ut of or relating to the contract or any sale of goods hereunder. buyer hereby consents to the jur isdiction of such courts. 13. attorneys' fees reasonable attorneys' fees and costs will be awarded to the p revailing party in the event of litigation involving and/or relating to the enforc ement or interpretation of the contract and/or any goods sold under it.

▲Up To Search▲

Price & Availability of IT9130

	To Download IT9130 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .